Code: M1795
A large reclaimed vintage school science lab worktop. The hardwood worktop is likely to be either teak or iroko and is ideal for a project. The top of the worktop has wear, fading and discolouration to the old varnish and purchaser will need to sand and refinish the wood to suit. The worktop had a hole cut into it for a sink and for two taps. Purchaser could cut the holes away if desired. The worktop has groves cut into it for water drainage. The worktop is in solid reclaimed condition with some signs of wear, as expected. The worktop has notches cut out of it and one edge is unevenly cut, therefore the width varies slightly. The worktop has some cracks and splits. The less wide side has a large split and cracks and the split runs through the wood to the underside but it appears to be stable. The underside has some holes cut into it. The wood has some small knocks and chips. There is a small 4-5mm cup or bow in the worktop. Please see pictures for condition details. The vintage lab worktop is very useful and is ideal for a diy project.
Measurements are approximate due to use and age.
Length of left side up to sink hole 47.5cm
Length of right side up to sink hole 115.7cm
Overall length 204.5cm
Width approx average 52cm (48cm approx if both edges were levelled)
Thickness 2.7cm
