Arc Reclamation

Tel: 01730 231995
Email: info@arcrec.com
Web site: https://www.arcreclamation.com/

DP0410 A PINE DIVIDER / DOOR & SIDELIGHT FOR SLIDING DOOR / DIVIDER

£395.00

Code: DP0410



A reclaimed, antique, pine internal ex-church room divider / door and sidelight. The divider has two panels for glazing and underneath these, two recessed panels with mouldings. The sidelight has one panel for glazing and one recessed panel below. We can glaze the dividers for an extra charge, please contact us to discuss your requirements and for a quote. The dividers have been painted cream and one face has varnish to the top half of them, however, the paint has chipping, flaking and losses and the varnish has fading and purchaser will need to sand and refinish the dividers to suit. 

The dividers are ideal for use as a sliding door or could be used as a pair, however the dividers will need some refiguration. As set up in the photographs the outer edges of each divider have a rebated edge. The inner edge of each divider has a groove or channel. If to be used as a pair, the dividers will need the outer edge rebates removed and the channels or grooves will need to be cut by approx 1.5cm each and the edges squared. We can square the divider edges and then add a rebate closing bead on the inner edges, for an extra charge. The width of the pair once squared and rebate added will be 132.5cm APPROX. The dividers could also be used on a sliding door track (purchaser will need to supply sliding door gear and track). If used as sliding doors then the edges may not need to be altered. Please contact us to discuss your requirements and for advice. 

The dividers are in solid reclaimed condition with some signs of age and wear, as expected. The dividers have had some patch repairs, knocks and chips. There is some slight separation to the joints in areas. There are some indentations, small holes and marks left from door hardware removal and there are some nails in the wood. There are some surface cracks but the dividers are stable. One panel is missing the mouldings. The tops of the dividers have been levelled but there are some splinters that will need sanding and the heights may need some further levelling. Please see pictures for condition details. The dividers have a nice period look and once glazed and re-finished they will add great character to a space. 

Height per divider 210.8cm & 210.6cm approx

Thickness of each divider 5cm approx

Width of pair once edges have been squared and rebate added 132.5cm approx (extra charge)

Please contact us if you need further information about the widths and to discuss how you are to use the dividers. We can provide a quote to set the dividers up as required. 

PLEASE NOTE: We have two further dividers available for sale together, please see our reference DP0409 for details.